Gas Interlock Systems by Gas Safe registered commercial engineers
We provide gas interlock systems for businesses, landlords and facilities managers across London. Commercial kitchens are some of the hardest-working gas installations in London. Ranges, fryers, ovens and chargrills run for long hours, and the gas supply must be interlocked with the extraction so that gas cannot flow unless ventilation is running. Our catering gas engineers install, repair and certify the whole kitchen.
Gas Interlock Systems is part of our commercial catering gas work. Whether you manage one site or a portfolio, you get the same engineers, the same standards and clear paperwork after every visit.
Commercial gas work is different from domestic work. Loads are larger, pipework runs further and safety controls such as interlocks, valve proving and flame supervision are more complex. That is why we only send engineers who work on commercial installations every day and know the equipment found in London plant rooms and kitchens.
What's included
- Interlock panel installation
- Air pressure and current sensing
- Proving and reset testing
- Interlock certificate
Before arranging a visit for Gas Interlock Systems
Make an inventory of the gas appliances on the cooking line, including movable units, and show the engineer the extraction controls, emergency stop and gas isolation. Describe whether the fault affects one burner, one appliance or the whole kitchen. Record the appliance model and any error display; kitchens often contain several brands and age groups. Scheduling around preparation and service can reduce disruption, but a suspected leak or failed safety device cannot wait for a convenient quiet period.
When you contact us about Gas Interlock Systems, describe what has changed since the equipment last worked normally. Include the make and model if you can read them safely, the number of affected appliances and any previous repair or inspection findings. Do not remove covers or attempt a reset repeatedly to collect this information. These details help define the visit, but they do not replace an on-site assessment by an appropriately qualified engineer.
What each part of the work involves
The scope below follows the work listed for Gas Interlock Systems. Not every installation needs the same action: the engineer will confirm what applies to your site before work starts and explain any additional work that a test or inspection identifies.
Interlock panel installation
For Gas Interlock Systems, this starts with confirming the equipment and the boundary of the work at the premises. The step listed as “Interlock panel installation” is not a box to tick from a description alone: the engineer needs access to the actual installation and its operating information. The result informs the next part of the visit, “Air pressure and current sensing”; if the first check reveals a defect, the sequence may need to change for safety. For Commercial Catering Gas, the correct test method and acceptance criteria depend on the appliance or installation, not on a generic checklist. Ask which readings or observations support the conclusion, what they mean for safe use now, and what remains to be done before the next planned visit.
Air pressure and current sensing
At this stage of Gas Interlock Systems, the step “Air pressure and current sensing” must be assessed against the equipment that is actually fitted. The engineer checks whether earlier alterations, site conditions or manufacturer instructions change the proposed approach. The result informs the next part of the visit, “Proving and reset testing”; if the first check reveals a defect, the sequence may need to change for safety. For Commercial Catering Gas, the correct test method and acceptance criteria depend on the appliance or installation, not on a generic checklist. Ask which readings or observations support the conclusion, what they mean for safe use now, and what remains to be done before the next planned visit.
Proving and reset testing
The practical work includes the step “Proving and reset testing”. It should be coordinated with the person responsible for the site, particularly if an appliance or supply must be isolated while the work is in progress. The result informs the next part of the visit, “Interlock certificate”; if the first check reveals a defect, the sequence may need to change for safety. For Commercial Catering Gas, the correct test method and acceptance criteria depend on the appliance or installation, not on a generic checklist. Ask which readings or observations support the conclusion, what they mean for safe use now, and what remains to be done before the next planned visit.
Interlock certificate
Before the Gas Interlock Systems visit is closed, the step “Interlock certificate” needs a clear recorded outcome. The engineer should explain any limitation or further action instead of leaving an unexplained result on a form. The final record should distinguish completed tests from recommendations, and identify anything that has deliberately been left out of service. For Commercial Catering Gas, the correct test method and acceptance criteria depend on the appliance or installation, not on a generic checklist. Ask which readings or observations support the conclusion, what they mean for safe use now, and what remains to be done before the next planned visit.
Choosing the right next step
Catering work considers the appliance and the kitchen as a system: gas rate, flame supervision, flexible connections, restraint, canopy extraction and any interlock all affect safe operation. A successful ignition test does not establish that an appliance is safe if ventilation fails or its flame-failure device does not shut off. Installation changes also need sufficient gas capacity and accessible isolation. Never bypass a trip, safety cut-out or interlock to keep service running.
A quotation or visit description should tell you whether the aim is to diagnose, make safe, repair, install, inspect or commission. Those are different outcomes. For Gas Interlock Systems, ask whether an interruption to the gas supply is expected, whether other trades or the site manager must attend, and which checks are needed before equipment can be put back into use. If a fault persists after an earlier repair, share the earlier findings so the engineer can investigate the whole sequence rather than repeating the same intervention.
How the job runs
- Call or book online. Tell us the site, the equipment and the problem. We confirm an arrival window, usually the same or next day.
- Survey and safety check. The engineer checks the installation, confirms the scope and explains anything unsafe before starting.
- The work. Interlock panel installation, then the remaining tasks above, carried out with minimal disruption to your staff and customers.
- Testing and paperwork. Everything is tested before we leave and you receive a written record you can hand to your insurer or landlord.
Standards we work to
Catering installations follow BS 6173 for appliance installation, IGEM/UP/19 for ventilation interlocks and the Gas Safety (Installation and Use) Regulations 1998, with CP42 certificates issued after inspection. Every engineer carries a Gas Safe ID card showing their non-domestic categories, and calibrated test equipment is used on every job.
Records and handover for Gas Interlock Systems
Keep an up-to-date appliance list and the inspection or repair record with the kitchen manager. Note which units were checked, which were left isolated and any outstanding work on hoses, restraints, extraction or emergency shut-off. When a cooking line changes, update the gas and ventilation assessment before returning it to service. The person opening the kitchen on the next shift should know the status of every affected appliance.
Keep the visit report with any earlier certificates, drawings and manufacturer instructions for the same equipment. If the engineer recommends follow-up work, record who will arrange it and whether the affected item may be operated meanwhile. This is particularly important where a site changes shifts or where the person booking the visit is not the person operating the equipment. Ask for clarification before the engineer leaves if the outcome or next step is unclear.
Who we work for
Our gas interlock systems customers include restaurants, takeaways, hotels, pubs, school kitchens, hospital kitchens, staff canteens and dark kitchens. We regularly work out of hours and at weekends so kitchens can keep trading and buildings stay open. Managing agents and FM companies can set up an account for multiple sites with consolidated records.
Why choose us for gas interlock systems
- Commercial-only Gas Safe registered engineers
- Same-day response available across London
- Written reports and certificates for every visit
- Fixed quotes for planned work, no hidden extras
- Out-of-hours and weekend appointments
Planning, access and cost
Most gas interlock systems jobs can be planned around your opening hours. Tell us about access arrangements, permits, parking and any restricted areas when you book, and send photos of data plates or fault codes if you have them, so the engineer arrives with the right parts. For planned work we confirm a fixed price in writing before we start. For reactive call-outs the first hour covers attendance and diagnosis, and we will not carry out further chargeable work without your approval.
Staying safe between visits
If you smell gas, turn off the supply at the emergency control valve, open doors and windows, avoid operating electrical switches and call the National Gas Emergency Service on 0800 111 999 before calling us. Keep plant rooms clear of storage, keep ventilation grilles unobstructed and log any lockouts or unusual noises. Good records help our engineers find faults faster and keep your certificates straightforward to renew.
Areas covered
We provide gas interlock systems throughout Greater London, including City of London, Westminster, Camden, Islington, Hackney, Tower Hamlets, Southwark, Lambeth, Kensington & Chelsea, Hammersmith & Fulham, Wandsworth, Greenwich, Lewisham, Newham, Croydon, Bromley, Barnet, Brent, Ealing, Hounslow, Hillingdon, Harrow, Enfield, Haringey and every other London borough.